Product Informations

SAT-11
ELIMINOSTAT Series

SAT-11 ELIMINOSTAT Series

Equipped with a safety device compliant with product liability law. A highly regarded product. When overcurrent is detected, the high-voltage power supply is shut off, and a warning is displayed.

Purpose:

Product features

The ELIMINOSTAT SAT Series comprises a static-eliminating electrode, a high-voltage power supply, high voltage cables and a high-voltage branch box for connecting the system units.
The SAT Series static eliminators are provided with a safety device that meets standards proscribed under the Product Liability Law.
This safety device incorporated in the SAT Series high-voltage power supplies is an over-current protector that cuts off the high-voltage power supply when an abnormal current is detected in the electrode or in the high-voltage cables.

  • The SAT Series static eliminators use the AC corona discharge method to provide a stable static elimination performance and a good balance between the positive and negative ions.
  • The high-voltage power supplies incorporate a safety device that meets standards proscribed under the Product Liability Law to maintain high reliability (a safety device is not provided with the AT-10).
  • The safety device uses an extremely high-precision method that detects an over-current in the secondary high-voltage transformer circuit. If an abnormal current leakage is detected in the static-eliminating electrode or a high-voltage cable, the safety device cuts off the high-voltage power supply and displays an alarm.
  • Shielded cables are used for the high-voltage cables to reduce the generation of noise.
  • The SAT Series high-voltage power supplies can be combined with any of the bar, point, or air electrodes offered.

Compatibility with Discontinued Products (ELIMINOSTAT)

Click Here For More Info

Wiring Examples and Precautions for High-Voltage Power Supplies and Static Elimination Electrodes (ELIMINOSTAT: SAT Series)

Click Here For More Info

Specification

Model SAT-11
Input power supply 110~120VAC or 220~240VAC (switch-selectable)
Power consumption 25 VA
HV power supply used Commercial frequency alternating current power supply
(wire wound high-voltage power supply)
Allowable output current 2.5 mA
Operating Environment 0 to 40℃
Main unit dimensions 90×220×110 mm (W×H×D)
Weight 3200 g
Alarm functions Buzzer and LED indication when a high-voltage abnormality or shutdown occurs
Allowable length for connecting electrodes / wiring 8 meters in total
Accessories Power supply cord (100 VAC 3P-plug)
(cord length: 2000 mm)
Please feel free to inquire!
Request estimate or demo equipment Consultation on problem solving, courses, aftersales service, etc..
Contact Form