Home > Product Informations > TESTER > CHARGED PLATE MONITOR model H0601 The CHARGED PLATED MONITOR is designed to evaluate the static elimination and ion balance characteristics of ionizers, and can measure the attenuation time of a charged plate and the offset voltage in steady state operation. The CHARGED PLATE MONITOR complies with the IEC standard(draft) and comprises a stainless steel plate, a potential measuring section, a high-voltage application section and a timer. - Two modes are available for setting the measurement voltage: a fixed mode that complies with the IEC standard (draft) TC 47 (Sec) 1330, and a freely-specifiable mode, thereby enabling the device to be used for a wide range of applications from on-site measurements at production plants to R & D projects. - Operation is extremely simple: Press the POWER button to turn on the power supply, the SELECT button to select the mode, and then the START button to perform measurement. - Measurement can be performed irrespective of whether the air flow comes from above the unit or from the side. - The device was designed with an aluminum case for light weight and easy portability. Moreover, the case's Alumite (anodic oxide) finish that was used instead of paint is difficult to scratch and generates very little dust. - An AC adapter is provided as a standard accessory. Four AA-type batteries can also be used to power the device in locations where an AC power supply is not available. - External output terminals are provided for voltage recording and alarm output.