| PIEZONIZER Zapp Ⅱ |
| Model |
Zapp Ⅱ |
| Input power supply |
DC+24 V ±10% |
| Electric consumption |
2.4 VA |
| Output voltage |
High frequency 2,500 V |
| Ion balance |
±15 V or less |
| Air pressure |
*1 Please check with below sheet |
| Airflow supply |
30 ℓ / min to 160 ℓ/min |
| Ozone density |
0.05ppm or less (air pressure input: 0.02 MPa, distance 300mm) |
| Guaranteed operating temperature |
0 to 40 ℃ (stored at -10℃ to 60℃) |
| Guaranteed operating humidity |
From 65% or less with no condensation (stored at -90% or less with no condensation) |
| Main unit dimensions |
87×18×50mm (W×H×D) not including protruding portion |
| Weight |
78g |
| Accompanying items |
Power supply cable |
| *1: The available air pressure range is different for each nozzle, please check with below sheet. |
| PIEZONIZER AGZ Ⅲ |
| Model |
AGZ Ⅲ |
| Input power supply |
24 VDC (AC adapter supplied; compatible with 100 to 240 VAC) |
| Current consumption |
0.1 A |
| Discharge Method |
High frequency AC corona discharge method |
| Output voltage |
2.5 kVAC |
| Ion balance |
±15 V or less(at factory shipment) |
| Supply airflow |
Max. 370 Nℓ / min (ANR)(0.6 MPa) |
| Ozone density |
0.04 ppm or less(at 150 mm) |
| Operating Environment |
0 to 40℃ /65%RH or less (no condensation) |
| Supply air range *1 |
0.05 to 0.6 MPa |
| Main unit dimensions |
164.6×25×135.8 mm (L×W×H)exc. protrusions. |
| Weight |
Approx. 200g (exc. cable) |
| Alarm function |
LED indication when high-voltage output stops |
| *1: Be sure to use clean, dry air for the supply air. Moreover, when the ionizer's power supply is in the ON status, make sure that air is being supplied when the ionizer is being used. (Applies to all models that use air) |
| PIEZONIZER AGZ Ⅱ-PA |
| Model |
AGZ Ⅱ-PA |
| Input power supply |
24 VDC (AC adapter supplied; compatible with 100 to 240 VAC) |
| Current consumption |
0.1 A |
| Discharge Method |
High frequency AC corona discharge method |
| Output voltage |
2.0 kVAC |
| Ion balance |
±30 V or less(at factory shipment) |
| Supply airflow |
Max. 370 Nℓ / min (ANR)(0.6 MPa) |
| Ozone density |
0.04 ppm or less(at 200 mm) |
| Fluid used |
Clean air |
| Operating Environment |
0 to 40℃ /65%RH or less (no condensation) |
| Supply air range *1 |
0.3 to 0.6 MPa |
| Main unit dimensions |
180×25×175 mm (L×W×H)exc. protrusions. |
| Weight |
Approx. 330g (exc. cable) |
| Alarm function |
LED indication when high-voltage output stops |
| *1: Be sure to use clean, dry air for the supply air. Moreover, when the ionizer's power supply is in the ON status, make sure that air is being supplied when the ionizer is being used. (Applies to all models that use air) |
| PIEZONIZER ANZ-SC3 |
| Model |
ANZ-SC3 |
| Input Voltage |
DC24V (with AC adapter for AC100 to 240V) |
| Electrical consumption |
400mA |
| Discharging way |
High-frequency AC corona method |
| Output voltage |
Approx. AC2,500V |
| Indication |
Green:Normal conditionRed:Abnormal condition |
| Buzzer |
Abnormal issue happen |
| Abnormal signal output |
Contact output under abnormal condition(MOS FET Realay B Contact , DC30V less 100mA) |
| Ion Balance |
Under ±15V |
| Ozone density |
Under 0.04ppm (Distance at150mm) |
| Air Supply |
Clean and Dry air |
| Air pressure range |
0.05 to 0.6 MPa |
| Air consumption |
Maximum 190 ℓ/min(ANR) |
| Air blow |
CONT : Continuously blowPULSE Hi : High Speed Pulse(10Hz)PULSE Lo : Low Speed Pulse(5Hz) |
| Enviroment |
0 to 40 degree15 to 65%RH(without Condensation) |
| Dimensions |
ANZ body : 18 dia ×154L(mm)Controlbox : 135W×50H×75D(mm) |
| Weight |
ANZ body : 95gControlbox : 570g |
| Accessories |
ANZ body, Controlbox, AC adaptor, Grounding cable, Holder(4 pcs), contactpin(5 pcs), air tubing, manual |
| Option |
Emitter needle : DN-W17 Air Pressure Guage |
